Tips to Test a Button Battery4619228
Button battery is recognized as a little battery which is generally used to power the little electronic devices. This button battery gets its name simply because it is round and resembles buttons or coins. Many individuals are actually not really familiar with this quite new type of battery. When you are having electronic device which stops working, it might be caused by a easy matter of the dead or dying button battery. At this time, this article is going to give you some suggestions of a testing method for the button battery that will help you to check its situation.
As the initial step, you ought to remove the battery from your device and then you require to inspect it for determining the battery voltage. The voltage is generally marked on the battery. It is recognized that most of the button batteries are produced in between 1.35 and three volts.
As the second step, you need to set the multimeter for displaying the voltage on the DCV scale.
The third step that you ought to do is to figure out the good side of your battery by discovering side with a "+" that marked on it. After that, you require to touch the positive probe of multimeter (red) anyplace on this side.
The fourth step is to touch unfavorable probe of multimeter (black) to the negative side of your battery. The unfavorable side is of course in the opposite side of the positive side.
The final step is to take a note of the voltage that is displayed on the multimeter. If you discover that the voltage is about 10 percent much less than the marked voltage on battery, you need to replace it. For instance, the 1.five battery should show the voltage of at least 1.35 volts, while the 3 volts battery should show the voltage of at least 2.7 volts.
