Tips to Test a Button Battery7552956
Button battery is known as a small battery which is commonly utilized to power the small electronic devices. This button battery gets its name because it is round and resembles buttons or coins. Numerous people are really not truly familiar with this quite new kind of battery. When you are having electronic device which stops operating, it might be caused by a simple matter of the dead or dying button battery. At this time, this post is going to give you some tips of a testing technique for the button battery that will assist you to check its condition.
As the first step, you should eliminate the battery from your device and then you require to inspect it for determining the battery voltage. The voltage is usually marked on the battery. It is recognized that most of the button batteries are made between 1.35 and three volts.
As the second step, you require to set the multimeter for displaying the voltage on the DCV scale.
The third step that you ought to do is to determine the good side of your battery by discovering side with a "+" that marked on it. Following that, you require to touch the good probe of multimeter (red) anyplace on this side.
The fourth step is to touch unfavorable probe of multimeter (black) to the negative side of your battery. The negative side is of course in the opposite side of the good side.
The final step is to take a note of the voltage that is displayed on the multimeter. If you find that the voltage is about 10 percent much less than the marked voltage on battery, you require to replace it. For instance, the 1.five battery must show the voltage of at least 1.35 volts, whilst the 3 volts battery must show the voltage of at least 2.7 volts.
