Tips to Test a Button Battery4854552
Button battery is recognized as a little battery which is generally utilized to energy the small electronic devices. This button battery gets its name simply because it is round and resembles buttons or coins. Numerous individuals are really not really familiar with this quite new type of battery. When you are getting electronic device which stops working, it may be brought on by a simple matter of the dead or dying button battery. At this time, this article is going to give you some suggestions of a testing technique for the button battery that will help you to verify its condition.
As the initial step, you should eliminate the battery from your device and then you need to inspect it for figuring out the battery voltage. The voltage is generally marked on the battery. It is known that most of the button batteries are produced between 1.35 and 3 volts.
As the second step, you need to set the multimeter for displaying the voltage on the DCV scale.
The third step that you should do is to figure out the positive side of your battery by finding side with a "+" that marked on it. Following that, you need to touch the good probe of multimeter (red) anyplace on this side.
The fourth step is to touch negative probe of multimeter (black) to the unfavorable side of your battery. The negative side is of course in the opposite side of the positive side.
The final step is to take a note of the voltage that is displayed on the multimeter. If you find that the voltage is about ten % much less than the marked voltage on battery, you need to replace it. For instance, the 1.5 battery must show the voltage of at least 1.35 volts, while the 3 volts battery must show the voltage of at least 2.7 volts.
