Tips to Test a Button Battery6094197
Button battery is recognized as a small battery which is commonly used to power the little electronic devices. This button battery gets its name because it is round and resembles buttons or coins. Numerous individuals are really not really familiar with this fairly new type of battery. When you are getting electronic device which stops operating, it might be brought on by a simple matter of the dead or dying button battery. At this time, this article is going to give you some suggestions of a testing method for the button battery that will assist you to verify its situation.
As the initial step, you should remove the battery from your device and then you need to inspect it for determining the battery voltage. The voltage is generally marked on the battery. It is known that most of the button batteries are produced between 1.35 and 3 volts.
As the second step, you require to set the multimeter for displaying the voltage on the DCV scale.
The third step that you should do is to figure out the positive side of your battery by discovering side with a "+" that marked on it. After that, you need to touch the positive probe of multimeter (red) anyplace on this side.
The fourth step is to touch negative probe of multimeter (black) to the negative side of your battery. The unfavorable side is of course in the opposite side of the positive side.
The final step is to take a note of the voltage that is displayed on the multimeter. If you discover that the voltage is about ten % much less than the marked voltage on battery, you require to replace it. For instance, the 1.five battery should show the voltage of at least 1.35 volts, while the 3 volts battery must show the voltage of at least 2.7 volts.
