Tips to Test a Button Battery8356118
Button battery is recognized as a small battery which is commonly used to energy the little electronic devices. This button battery gets its name because it is round and resembles buttons or coins. Numerous people are really not truly familiar with this quite new type of battery. When you are getting electronic device which stops operating, it might be caused by a simple matter of the dead or dying button battery. At this time, this article is going to give you some tips of a testing technique for the button battery that will help you to check its situation.
As the first step, you should eliminate the battery from your device and then you require to inspect it for figuring out the battery voltage. The voltage is generally marked on the battery. It is recognized that most of the button batteries are produced between 1.35 and 3 volts.
As the second step, you require to set the multimeter for displaying the voltage on the DCV scale.
The third step that you should do is to figure out the positive side of your battery by discovering side with a "+" that marked on it. After that, you need to touch the good probe of multimeter (red) anyplace on this side.
The fourth step is to touch unfavorable probe of multimeter (black) to the negative side of your battery. The unfavorable side is of course in the opposite side of the positive side.
The last step is to take a note of the voltage that is displayed on the multimeter. If you find that the voltage is about 10 percent much less than the marked voltage on battery, you require to replace it. For instance, the 1.five battery must show the voltage of at least 1.35 volts, whilst the 3 volts battery must show the voltage of at least two.7 volts.
