Various Types of Sign Foam Letters458077
If you are looking for some thing special, and effective as lettering for the lobby of your office, then sign foam letters are a fantastic option for you. These sign letters are accessible in various types such as metal, plastic and painted foam letters.
Painted foam letters are created by sandwiching structural foam in between surfaces that are smooth and difficult and then pressing in place. The sides of these letters are painted the same matte or semi gloss colour as its face.
Plastic laminated foam letters are available in 19 colors and are created by laminating it to structural foam that is sandwiched between smooth surfaces that are also difficult. This plastic is colored with a higher gloss or matte sheen.
Metal laminated foam letters are formed by laminating gold, silver or copper to structural foam that is sandwiched in between hard and smooth surfaces. This metal laminate may be polished to a shine or brushed matte. All these three kinds of letters are an inch thick and are mounted using pressure sensitive adhesive.
Various adhesion techniques
The pressure sensitive adhesive used for installing these sign letters is called repositionable adhesive and this enables you to eliminate and then at any time re-install your letters as needed.
However, if you want some thing for permanent adhesion, use double sided tape. When you use this tape for adhesion, the wall or surface that you can apply the letters to may damage when you peel the letters off.
You can also set up sign foam letters using pin mount installation which involves sticking a flat head type tack or even a pin onto the backs of the letters. This method is very best for installing letters on a tack board or for tradeshow displays but not for any drywall surfaces.
With Velcro installation, you have to use the hook and loop of Velcro. Mount the hook on each letter and the loop on the surface you intend to install the letters with adhesive. This way, you can eliminate and re-set up the letters whenever you want to. To make sure that you accurately install letters, it would be better for you to use a spacing tape or pounce pattern for all installation methods.
